Comprehensive Guide to Door Handles Specifications and Manufacturing

 

Comprehensive Guide to Door Handles Specifications and Manufacturing

Foreword

The Indian Standard for door handles, now in its fifth revision, has been adopted by the Bureau of Indian Standards. Previous revisions were made in 1965, 1972, 1979, and 1987. This latest revision reflects practical experience, updates to referenced standards, and changes in dimensions and sampling clauses.

The technical committee responsible for this standard is listed in Annex C. Compliance is assessed by rounding off the final values according to IS 2: 1960.

Door Handles - Specification

1. Scope

This standard defines the requirements for the materials, manufacture, dimensions, and finish of door handles. It applies to handles commonly fixed to doors.

2. References

Essential Indian Standards are listed in Annex A and are integral to this standard.

3. Types

Door handles are categorized by material:

  • Type 1: Cast iron, malleable cast iron, cast brass, cast aluminium, or zinc alloy die-casting.
  • Type 2: Mild steel.
  • Type 3: Brass or aluminium alloy.
  • Type 4: Cast brass, aluminium alloy pressure die casting, and extruded aluminium alloy.

4. Materials

Materials must conform to the standards outlined in Table 1:

  • Mild Steel: Grade 0 of IS 1079: 1994.
  • Cast Brass: LCB 2 of IS 292: 1983.
  • Aluminium Alloy: Designation 5230 of IS 617: 1975.

5. Manufacture

Door handles should be well-made, free from defects, and correctly shaped. They must have a smooth finish. Cast handles should be free from casting defects, and mechanically joined handles should be as strong as integrally cast ones.

6. Dimensions and Tolerances

The dimensions and tolerances of door handles must follow Tables 2A and 2B, with specific tolerances provided.

7. Finish

Finishes vary by type:

  • Type 1: Bright satin, nickel chromium plated, or copper oxidized.
  • Type 2 & 3: Stove enamelled black.
  • Type 4: Bright satin, nickel plated, or anodized aluminium.

8. Sampling and Criterion for Conformity

Sampling methods and criteria ensure that door handles meet the specified dimensions and finish. A lot is considered conforming if the number of defective handles does not exceed the allowable limit.

9. Marking

Each door handle must be marked with the manufacturer's name or trademark. The product may also bear the Standard Mark as governed by BIS regulations.

10. Packing

Door handles should be packed in cartons with labels indicating the manufacturer’s details, type, size, and quantity.

Conclusion

For those exploring options from #doorkitmanufacturers or seeking specific products from #doorkitmanufacturersinahmedabad or #doorkitmanufacturersinaligarh, understanding these specifications ensures you select high-quality door handles. Whether you need a #doorhandle, #doorhandleset, or #doorstopper, adhering to these standards guarantees reliability and excellence in your hardware.


Hashtags

#doorkitmanufacturers #doorkitmanufacturersinrajkot #doorkitmanufacturersinindia #doorkitmanufacturerinahmedabad #doorkitmanufacturersinaligarh #circleindustriesahmedabad #doorlatchset #doorkit #doorkitmanufacturers #doorkitsetstainlesssteel #aldropdoorkit #aldrop #aldropfordoor #aldropformaindoor #aldropandhandle #aldropbolt #cabinethandle #kitchencabinethandle #handleforcabinet #doorhandle #doorhandleset #maindoorhandles #doorstopper #towerbolt

Comments

Popular posts from this blog

A Detailed Guide on Stainless Steel Sliding Door Bolts for Use with Padlocks

Stainless Steel: Essential Sliding Door Bolts for Coastal Areas

Why Stainless Steel is the Best Choice for Your Door Fittings