A Detailed Guide on Stainless Steel Sliding Door Bolts for Use with Padlocks

 

A Detailed Guide on Stainless Steel Sliding Door Bolts for Use with Padlocks

Introduction

In general building construction, stainless steel sliding door bolts are among the necessary parts fitted for use in doors, gates, among others, for padlocking purposes. This blog will focus on the details, dimensions, and materials used in these sliding door bolts, so you will find the right one.

I. Limitations or Those Stainless Steel Sliding Door Bolts

This standard prescribes the material and manufacturing prohibition, dimensional allowance, and surface finish of dip-type stainless steel sliding door bolts that are commonly applied to locking mechanisms of several kinds of doors and gates.

II. Material Specifications

Sheet Material
The material used in the form of stainless steel sheets should meet Grades X07Cr18Ni9, or better still Grades X10Cr17Mn6Ni4N20 to the IS 6911 standard, in order to achieve the desired bolt rust and corrosion resistance.

Bolt Material
Depending on the level of demand, the bolts themselves should be made from stainless steel that conforms to Grades X04Cr13; X12Cr13; X04Cr18Ni10 or X07Cr18Ni9 as per IS 6527.

III. Sizes and Dimensions

Standard stainless steel sliding door bolts are available in standard dimensions in order to suit different kinds of uses. The common sizes available are:

  • 200 mm
  • 250 mm
  • 300 mm

These sizes allow flexibility and perfect compatibility with various door types and locks’ demands.

IV. Manufacturing Standards

General Quality
Stainless steel sliding door bolts should be well made, with no surface defects, and polished bright with a finish that is smooth. The bolt should be changed to the correct shape and be easily slid over the hammertong to engage the other nut (see figure 2).

Tolerances
The dimensions of the sliding door bolts and tolerances of the same must meet the figures stipulated in this specification and must enable effective locking.

V. Packing and Marking

Packaging
Stainless steel sliding door bolts should be requisitioned in cartons and each carton must be well labeled with the source of manufacture, size, as well as the number of bolts included.

Marking
Every bolt must bear the manufacturer’s trademark and the word ‘Stainless Steel’. The marking must be clear for purposes of tracking the manufacturer and showing authenticity. Also, bolts may carry the Standard Mark with reference to the Bureau of Indian Standard.

VI. Finish and Durability

There is no set requirement for the surface finish of the sliding door bolts; they should be bright; however, they should have a suitably textured, smooth surface to resist corrosion. This finish is most important in areas with high humidity because survival in such areas is defined by resistance to rusting.

Conclusion

Selecting the appropriate stainless steel sliding door bolts gives assurance of security, reliability, and endurance in cases of rusting or the formation of rust tracks. Here, various sizes and strict measures have been employed in manufacturing these bolts to give a worthy solution to your security needs.

Hashtags

#doorkitmanufacturers #doorkitmanufacturersinrajkot #doorkitmanufacturersinindia #doorkitmanufacturerinahmedabad #doorkitmanufacturersinaligarh #circleindustriesahmedabad #doorlatchset #doorkit #doorkitmanufacturers #doorkitsetstainlesssteel #aldropdoorkit #aldrop #aldropfordoor #aldropformaindoor #aldropandhandle #aldropbolt #cabinethandle #kitchencabinethandle #handleforcabinet #doorhandle #doorhandleset #maindoorhandles #doorstopper #towerbolt

Comments

Post a Comment

Popular posts from this blog

Stainless Steel: Essential Sliding Door Bolts for Coastal Areas

  Stainless Steel: Essential Sliding Door Bolts for Coastal Areas Introduction Coastal regions often have high humidity levels, causing metal to corrode quickly, which accelerates the wear of building materials. In such cases, stainless steel sliding door bolts are the ideal solution. This blog provides an overview and describes the principal characteristics that make these bolts great for coastal applications. I. Why Stainless Steel? Rust Resistance Mild steel material tends to rust over time, especially in regions with high humidity. This makes stainless steel sliding door bolts rust-proof, long-lasting, and reliable. They are ideal for areas near the sea or places with high atmospheric humidity for most of the year. Aesthetic Appeal Functionally, stainless steel bolts have significant advantages. Additionally, the aesthetics of a building are crucial since the exterior is important. The shiny and smooth surface of stainless steel enhances the beauty and s...
Read more

Essential Guide to Floor Door Stoppers: Indian Standards and Key Considerations

  Essential Guide to Floor Door Stoppers: Indian Standards and Key Considerations Introduction Floor door stoppers are crucial for maintaining door functionality and preventing damage. This blog offers a comprehensive overview of the Indian Standards (Third Revision) for floor door stoppers, covering material requirements, manufacturing standards, and the importance of certification. Understanding these standards is essential for industry professionals, including #doorkitmanufacturers and #doorkitmanufacturersinaligarh. 1. Historical Overview The specification for floor door stoppers was initially introduced in 1962 and has been revised multiple times to enhance functionality and material use. The third revision, adopted on January 24, 1980, reflects these advancements, ensuring that products from #doorkitmanufacturerinahmedabad and other manufacturers meet contemporary quality standards. 2. Material Requirements The Indian Standard specifies materials for f...
Read more